The CarRundown verdict.
We recommend the Haudio S10A CVS1541-AJ for drivers who want a 10.1-inch screen and wired or wireless CarPlay or Android Auto from a single-DIN receiver. Its included rear camera and GPS antenna broaden the package, while a physical volume knob keeps basic adjustments familiar. Haudio also lists DSP, EQ and audio optimization. Fit depends on more than the receiver slot: check screen clearance, vehicle-specific wiring and factory amplifier or steering-control interfaces before ordering.
The S10A pairs a 10.1-inch floating display with a single-DIN receiver, physical playback buttons and a rotary volume control. Haudio also lists wired and wireless phone integration, DSP, EQ, radio and GPS features. That combination can suit a dashboard with limited receiver space but enough room above it for a large screen. We like the range of functions and the supplied camera and GPS antenna. The key decision is installation fit: measure the display position and confirm every adapter and factory function with an installer before buying.
The details that matter.
| Selected version | S10A CVS1541-AJ, Default Title · SKU CD1541AJK0210 |
|---|---|
| Receiver format | Single-DIN receiver with a 10.1-inch floating display; confirm dashboard clearance |
| Display | 10.1-inch IPS, 1280 × 720, according to the product manual |
| Phone integration | Wired and wireless Apple CarPlay and Android Auto listed by Haudio |
| Audio features | DSP, EQ and ASP audio optimization listed by Haudio; product artwork advertises 48-band DSP |
| Rear camera | Rear-view camera and cable listed in the package; manual recommends the included camera if the factory camera is incompatible |
| Power | 12V DC nominal; manual lists a 9–16V input range |
| Package highlights | Power and USB leads, GPS antenna, 20P-RCA harness, rear camera and cable, mounting screws, release keys and two frames |
What stands out
- Large 10.1-inch IPS display paired with a single-DIN receiver format
- Haudio lists both wired and wireless CarPlay and Android Auto
- Physical playback buttons and a rotary volume control sit below the screen
- GPS antenna, rear-view camera and installation leads are included in the listed package
- DSP, EQ and ASP audio optimization features are listed by Haudio
Before you buy
- A single-DIN receiver opening does not establish that the floating display clears every dashboard
- The manual recommends professional installation and an exact vehicle wiring diagram
- Factory amplifier, steering-wheel controls, CAN-bus functions, fascia and camera retention may need vehicle-specific interfaces or setup
- The manual says the factory camera may be incompatible and directs users to the supplied camera
- The manual specifies a 12V DC system; do not assume suitability for another electrical system
A single-DIN receiver with a bigger screen plan
Haudio lists the CVS1541-AJ as the S10A 10.1-inch stereo for single-DIN vehicles. That describes the receiver format, not the space the display occupies: the official product photo shows the screen extending above the chassis. Check the receiver opening and depth, then map the screen against vents, switches, hazard controls, the shifter and the driver’s view. A compatible fascia or mounting kit may also be needed. Haudio says its included wiring harness avoids cutting or soldering for compatible vehicles, but compatibility is conditional. A single-DIN label is a starting point; the exact dashboard and vehicle wiring decide whether the installation works.
Phone projection, navigation and a supplied camera
Haudio lists wired and wireless Apple CarPlay and Android Auto, GPS navigation, AM/FM/RDS radio and voice control. The manual describes wired phone connection through the supplied 4-pin USB lead and wireless pairing through Bluetooth. Check that your phone and preferred connection suit the exact setup. The package list includes a GPS antenna and rear-view camera with its cable, so there is more here than a screen alone. Camera installation still means choosing a mounting position, routing the lead to the receiver and confirming the reverse-light connection. If you want to reuse a factory camera, the manual cautions that the original camera may not work with the S10A and directs owners to use the supplied camera when incompatible.
Physical controls and audio adjustments
The S10A has a rotary volume control and physical playback buttons below its touchscreen. That gives basic volume and track adjustments a direct control surface, which some drivers may prefer to a screen-only layout. Haudio lists DSP, EQ and ASP audio optimization, and its product artwork advertises a 48-band DSP. The manual lists output power as 4 × 20W RMS; these are manufacturer specifications, not CarRundown sound measurements. If your vehicle has a factory amplifier, the manual calls out connecting its REM control wire to the S10A harness’s ACC wire. Ask an installer to verify the car’s actual wiring and any amplifier interface before connecting the unit.
Check steering controls and vehicle wiring separately
Haudio’s manual describes steering-wheel-key learning and CAN-bus configuration for compatible vehicles. Those settings do not guarantee that the original buttons, amplifier or other factory features will work without the right vehicle-specific adapter and setup. Confirm the exact year, make, model and trim against a fit guide, then ask which fascia, harness, antenna adapter, camera interface and CAN-bus parts are needed. The manual recommends professional installation, use of the exact wiring diagram and a 12V DC electrical system. If a factory camera or amplifier is important to you, make that a specific fit question before ordering rather than assuming the included harness covers every connection.
What is in the package
The manual’s accessory list includes a power cable, 4-pin USB lead, 10-pin rear-camera interface wire, rear-view power lead, GPS antenna, 20-pin RCA wire, installation screws, cage-release keys, the rear camera and its cable, two frames and the manual. This is a useful starting bundle for the stereo and camera, but it is not a promise that your vehicle-specific fascia, amplifier, steering-control or CAN-bus adapters are included. Confirm those items with the seller or installer against your exact car. The manual also recommends professional installation, so include labour and any required interface parts in the budget.
A dated price and code check for this exact SKU
On October 22, 2026, Haudio listed the S10A CVS1541-AJ Default Title variant, SKU CD1541AJK0210, at $166.99 USD. In an anonymous US cart on the same date, code SEBASTIANBASSOL applied to variant 51672294392039 and brought the selected line to $141.95 before tax and shipping. The code replaced the automatic 10% New Customer Offer; the two did not stack. That is an observed result for this SKU and date, not a promise about every Haudio product, future prices, another region or current inventory. Check the exact cart before paying.
A good fit for
Drivers who want a large phone-projection display in a compatible single-DIN installation, value physical controls and audio adjustments, and are prepared to verify screen clearance and vehicle wiring with an installer.
Consider another option if
Drivers who need a guaranteed universal fit, want to retain an existing factory camera without confirming compatibility, lack room for a large floating screen, or prefer an upgrade that requires no vehicle-specific wiring or installation work.
Keep reading: How to check car stereo fit and installation.
Your questions, answered.
What is the discount code for the Haudio S10A car stereo?
The Haudio Car Stereo discount code is SEBASTIANBASSOL for 15% off on eligible purchases at haudiocarstereo.com. Check the exact item and final total at checkout. The official CVS1541-AJ · Default Title · SKU CD1541AJK0210 price was $166.99 in US on October 22, 2026. With the code, the selected item is $141.95, before tax and shipping. The code replaced the store’s 10% New Customer Offer rather than stacking.
Does single-DIN mean the Haudio S10A fits my car?
No. It describes the receiver format. Check the exact dashboard opening, depth, fascia, wiring and the extra space needed for the 10.1-inch display with a vehicle-specific fit guide or installer.
Does the S10A include a rear camera?
Yes. The product listing and manual package list include a rear-view camera and cable. The manual says a factory camera may be incompatible, so confirm its signal and interface before planning to reuse it.
Are CarPlay and Android Auto wired or wireless?
Haudio lists wired and wireless CarPlay and Android Auto. The manual describes wired connection through the supplied 4-pin USB lead and wireless pairing; check phone compatibility for your setup.
Can I keep the factory amplifier and steering-wheel controls?
The manual describes steering-wheel-key learning and CAN-bus configuration for compatible vehicles, and it calls out the factory amplifier REM wire. Ask an installer which interfaces and wiring your exact vehicle needs before ordering.
What price did the Haudio code produce for this S10A?
Haudio listed the S10A CVS1541-AJ Default Title variant at $166.99 USD on October 22, 2026. In an anonymous US cart, SEBASTIANBASSOL applied to this exact SKU and showed $141.95 before tax and shipping, replacing the automatic 10% New Customer Offer.
Product specifications checked against Haudio’s official product information on October 22, 2026 and the official manual. Recommendations are our editorial assessment. Our editorial standards.
